Starting Window; Job Record Window - SICE A 926 Manual De Instrucciones

To do this, select the "Demo" option in the Service" window.
To access the service window, press the F8 key from the programme's starting screen.
In this situation ("Demo" mode), a special icon is displayed in the top right-hand corner of the
heading bar. The values displayed are completely random.
At the end of the demo, remember to repeat the same procedure to return the machine to
working status.
The following keys are active in the starting window (fig. 26):
- F1 invokes on-line "Help".
- F2 exits the alignment program (with password prompt) and return to the Windows desktop.
- F3 (or "Enter") goes to the next screen in the established operation sequence (job record,
vehicle / customer databank, compensation, measurement).
- F4 sets up all the status option settings (setup).
- F6 to recover the last job done (with icon active).
- F8 opens the utility procedures window.
- F9 skips vehicle selection from the databank ("generic vehicle" mode).
- F10 exits the alignment program and Windows with the correct power-down procedure.
Press the F4 key to display/set up all the aligner options.
The general setup function (F4 from the starting window) has been provided because some
users prefer to change all the available options before starting the measurement procedures.
In all the working windows, press the F4 key to display/set up all the options relating to the
current working window.
If vehicle selection by means of job record has been set in the machine setup as alignment
operating procedure, the job record input window appears automatically.
This window allows input of the vehicle data, the customer and the vehicle make/model
selection following the procedures described in the "General Considerations" section.
The following keys are active in this window:
- F1 displays the on-line "Help" function
- F2 returns to the previous screen
- F3 (or "Enter"): advances to the next window
- F4 sets :
 Units of measurement:
Pressure

• Bar
• Psi.
Mileage/Kilometres on the clock

• Kilometres
• Miles
 Job record
Type

• Minimal
• Complete
- F5 to access job record management
- F6 to access vehicle record management

STARTING WINDOW

JOB RECORD WINDOW

26