Customer Record Window; Operator Record Window - SICE A 926 Manual De Instrucciones

displayed. If you answer yes, the window is automatically filled in. If you answer no, an empty
window appears so that the car number can be entered.
• If the customer data are changed or new data are entered for the first time, the program asks if you
wish to access the customer data sheet management window for entering and storing the data.
To access this window, press the F7 key from the job record input window.
It displays the list of customers saved on file.
To select a job, proceed as described in the paragraph "General considerations".
The following keys are active in this window:
- F1 displays the on-line "Help" function
- F2 returns to the previous window
- F3 (or "Enter"): confirms selection of a customer and advances to the window which displays
the customer's data.
- F5 to print the complete list of the customers stored in the file.
- F6 modifies the data of the customer selected from file
- F7 deletes the selected customer from file
- F8 enters a new customer on file
- F10 returns to the job record input window.
Notes
• Press F8 to enter a new customer; the program checks if the customer is stored in the file
when the relevant data are entered. If the data are present, the program signals it and asks if
they have to be displayed. If you answer yes, the window is automatically filled in. If you
answer no, the window appears completely empty.
To access this window, press the F8 key from the job record input window.
It displays the list of operators saved on file.
To select a job, proceed as described in the paragraph "General considerations".
The following keys are active in this window:
- F1 displays the on-line "Help" function
- F2 returns to the previous window
- F3 (or "Enter"): confirms selection of an operator and advances to the window which
displays the operator's data.
- F5 to print the complete list of the operators stored in the file.
- F6 modifies the data of the operator selected from file
- F7 deletes the selected operator from file
- F8 enters a new operator on file
- F10 returns to the job record input window.
Notes
• Press F8 to enter a new vehicle; the program checks if the operator is stored in the file when
the relevant data are entered. If the data are present, the program signals it and asks if they
have to be displayed. If you answer yes, the window is automatically filled in. If you answer no,
the window appears completely empty.

CUSTOMER RECORD WINDOW

OPERATOR RECORD WINDOW

28