Glossary - SICE A 926 Manual De Instrucciones

When buying this new product your distributor will also inform you of the possibility to return free
of charge another end of life equipment as long as it is of equivalent type and has fulfilled the
same functions as the supplied equipment.
A disposal of the product different from what described above will be liable to the penalties
prescribed by the national provisions in the country where the product is disposed of.
We also recommend you to adopt more measures for environment protection: recycling of the
internal and external packaging of the product and disposing properly used batteries (if
contained in the product).
With your help it is possible to reduce the amount of natural resources used to produce
electrical and electronic equipments, to minimize the use of landfills for the disposal of the
products and to improve the quality of life by preventing that potentially hazardous substances
are released in the environment.
RECOMMENDED FIRE-EXTINGUISHING EQUIPMENT
When choosing the most suitable fire extinguisher consult the following table:
Water
Foam
Dry chemical
2
CO
YES* = Use only if more appropriate extinguishers are not on hand and when the fire is small.
The indications in this table are of a general nature.
They are designed as a guideline for the user.
The applications of each type of extinguisher will be illustrated fully by the respective
manufacturers on request.
Following there is a brief description of some of the technical terms used in this manual.
Characteristic Angles
This term refers to all the angles that can be normally measured on a wheel aligner (total
front/rear toe, left/right and front/rear half toe values, left/right and front/rear camber, left/right
caster, left/right king-pin angle, and steering angle difference at 20°).
CMOS
Special type of infrared measuring head. It has excellent linearity.
Longitudinal goniometer
CMOS measuring head that measures the angles using an infrared beam that is parallel to the
vehicle's axis of symmetry. Goniometers that measure the angles between the front and rear of
the vehicle.
Transverse goniometer
CMOS measuring head that measures the angles using an infrared beam that cuts across the
vehicle. Goniometers that measure the angles between the right and left side of the vehicle.
Dry combustibles
YES
YES
YES*
YES*
Inflammable liquids
NO
YES
YES
YES*
WARNING

GLOSSARY

56
Electrical fires
NO
NO
YES
YES*