Transport, Storage And Handling; Machine Transport Conditions; Ambient Conditions In The Place Of Storage; Handling - SICE A 926 Manual De Instrucciones

These instructions are for the attention of persons with basic mechanical skills. We have
therefore condensed the descriptions of each operation by omitting detailed instructions
regarding, for example, how to loosen or tighten the fixing devices on the machine, etc.
Do not attempt to perform operations unless properly qualified and with suitable experience.
In case of need, please contact our nearest authorized Service Centre for assistance.
NOTE
All the installation operations must be carried out by Technical Service personnel authorized by
the Manufacturer.

TRANSPORT, STORAGE AND HANDLING

The aligner must be shipped in its original packing and stowed in the position indicated on the
outside.
The system is shipped on a pallet, with cardboard packaging measuring 1160 x 830 x 1550 (h)
mm.
The weight of the equipment in its packaging is 140 Kg.
• Relative humidity: 20% ÷ 90%
Temperature range: -10° ÷ +60°C.
•
Do not stack other items on top of the packing or damage may result.
To move the packing, insert the tines of a fork-lift truck into the slots on the base of the packing
itself (pallet) (fig. 1).
To move the machine, use the wheels of the aligner; to lift the machine, insert the tines of a
fork-lift truck under the lower base of the wheeled cabinet, keeping them close to the wheels of
the aligner (fig. 2).
This operation must be carried out very carefully to prevent the unit from tipping over or
being damaged.
Handle with care: violent vibrations may damage the equipment.

Machine transport conditions

Ambient conditions in the place of storage

WARNING

Handling

WARNING
ATTENTION
6