SICE A 926 Manual De Instrucciones página 81

Deletes the selected item (Make - Vehicle - Customer - Job) (Make - Vehicle
entered by the user).
Opens the customer record management window.
Prints out the final record of the job done.
Sets chassis clearance data input with unit of measurement in millimetres.
Sets chassis clearance data input with unit of measurement in degrees.
Displays the calibration check window.
Displays the window for input of a new Customer - Vehicle - Make - Operator.
Displays the radio module setup window.
Displays the operator management window.
Displays a window with a list of working windows. Used for skipping between
windows.
Displays the service programme selection window. [Demo – Crooked steering
wheels – Measuring head calibration – Measuring head test – After-sales service –
Job count (if set) – Radar adjustment (Optional, if enabling has been purchased) –
Backup/Restore].
Recalls the window for selection of the vehicle from the databank.
Displays the window for checking of the calibration of the mechanical values.
Skips vehicle selection from the databank by selecting "typical vehicle" mode.
Locks out the data to allow levelling of the measuring heads.
Releases the data locked out earlier to allow levelling of the measuring heads.
Opens the job record for input of the customer and vehicle data
Aborts the job in progress and returns to the "starting screen".
23