General Considerations; Selecting Functions; Scrolling Items In A List; Setting An Option - SICE A 926 Manual De Instrucciones

The run-down process consists in draining all four batteries completely with a constant
absorption current, and then recharging them.
We recommend running down the batteries every 15 - 30 days, depending on the number of
recharge cycles performed (the more frequently the batteries are charged, the more frequently
the run-down procedure is necessary). To run down the batteries, leave the sensor heads on
(from the sensor head test screen) until the batteries are fully drained.
NB:
Rechargeable NiMh AA penlight batteries are used. When fully charged, new batteries with will
ensure 8 hours of continuous operation.
The equipment's simple interface makes operation quick and easy to learn. The operating
procedures are generally standardised throughout the program, as summarised below.
The functions available in each program context are shown as special icons on a bar at the
bottom of the screen.
To select a specific function, press the key (from F1 to F10) indicated on the icon in question.
To facilitate and simplify the use of the machine, each key is generally associated with the same
type of command in the various program contexts.
In particular:
- F1 invokes the on-line "Help".
- F2 equivalent to "Esc", returns to the previous window (except in the starting screen
where a password must be entered to shut down the program and switch control to
Windows
- F3 equivalent to "Enter", advances to the next window.
- F4 calls up a screen of status option settings, subdivided into logical groups. For
example: units of measurement, measurement data resolution, ...
The options shown are context-sensitive in relation to the point of the program in
which F4 was pressed.
- F10 returns to the starting screen. When pressed from the starting screen, this key exits
both the program and Windows , in order to correctly switch off the PC.
- F5 ÷ F9 have functions which may vary in the context of each specific program.
To scroll and select items from a list (menu), such as the databank, use the , arrow keys and
the Pag , Pag page up/down keys.
Sometime the values in a table can be selected by scrolling up or down through the fields
provided using the F5 or F6 keys.
In some cases an item can be selected directly by typing its first letter.
To change the options in the screens called up by pressing the F4 and F5 keys, use the "Tab",
"Shift" + "Tab" keys to move from one group of options to the next, and the ,
scroll through the individual options within the selected group.
Press the F3 key to exit the Setup window and save the settings.

GENERAL CONSIDERATIONS

Selecting functions

®
).

Scrolling items in a list

Setting an option

19
arrow keys to