Animation Window - SICE A 926 Manual De Instrucciones

• Diameter selected by user
• Diameter 28.65;
• Diameter 27.28;
• Diameter 400mm
Setback and Track Difference

• Degrees;
• Length;
Length

• Millimetres;
• Inches;
Angles

• Grades;
• Degrees;
Pressure

• Bar;
• Psi;
Weight

• Kilograms;
• Pounds;
 Alignment procedure
Databank value display

• Yes;
• No;
- F5 decreases the rim diameter measurement
- F6 increases the rim diameter measurement
- F7 displays the vehicle adjustment window
- F8 displays a window with a list of working windows. Used for skipping quickly between windows.
- F10 returns to the starting window.
This window is recalled by pressing key F7 from the following windows:
- Databank data summary;
- Rear axle adjustment
- Front axle adjustment.
This window is used for playing video clips, which illustrate the procedure for adjusting the
following angles:
- rear toe
- rear camber
- front toe
- toe curve (for Audi/Volkswagen)
- front camber
- caster
king pin inclination (King pin)
-
Certain angles may be adjusted, in which case the corresponding animations will or will not
exist, as indicated by the graphics. To select a video clip, press key F5 or F6 and then press to
switch to F3 step-by-step display.
When the video clip of the adjustment has finished, key F5 or F6 can be used to scroll through
the various steps of the procedure.

ANIMATION WINDOW

35