SICE A 926 Manual De Instrucciones página 106

Message
"Operation failed"
"Not enough disc space"
"Data filing path not found"
"Undefined error."
"Save Data" procedure (Backup)
The "Save Data" procedure can be performed in manual or automatic mode.
The "Save Data" procedure can be carried out in compressed mode (zip format) or by simply
making an exact copy of the files, without zipping them.
For the automatic mode, the following functions can also be set up:
1. how often the program should perform the "Save Data" procedure
2. confirmation request to the user before filing.
A) "Save Data" procedure setting up
To set up the "Save Data" procedure, proceed as follows:
1. From the starting screen (Logo screen), press "F8"
2. Select the "Save Data" option with the ↑ or ↓ arrows
3. Press "Enter" ↵ to confirm.
The screen on figure 51 will be displayed.
N.B.: To move through the different objects (boxes) present on the screen, use
the tab key.
4. With the ↑ or ↓ arrows, select, in the box "B", the disc where you wish to save
"Data Saving".
5. With the ↑ or ↓ arrows, select, in the box "C", the folder where you wish to save
"Data Saving".
6. Press "Enter" ↵ to confirm.
The data filing path is displayed in full in the box "A"
7. In the box "D", it is possible to select automatic filing (Data Saving) using the space
bar.
8. In the box "E", indicate how often you wish to perform "Data Saving" using the
numeric keypad.
Operation carried out unsuccessfully (Settings saving, "Save
data" execution, "Reset data" execution). Try carrying out the
operation again.
During the "Save data" procedure, the space available, in the
destination path selected, is less than what is requested. The
procedure is not performed. Select another path with enough
space and repeat the procedure.
During the "Save data" procedure, if you try to perform the
"Save data" procedure in a path not found (wrong) or removed
(E.g. USB support).
Check by performing the procedure described in the
- "Save Data" procedure setting up section - the path set for the
"Save data" procedure and, if required, select a valid path.
In presence of an unpredicted status. Indicate the exact
procedure performed, which has caused the error, to the
technical support service.
48
Description