Ambient Conditions In The Place Of Operation; Electrical Hook-Up - SICE A 926 Manual De Instrucciones

Installation:
• Position the cabinet (B, fig. 16), referring to the positioning diagrams (fig. 19 - 20 - 21).
If you are not faced with one of the standard conditions illustrated, place the Hard Lock
device so that it is as "visible" as possible (i.e. with the smallest number of metal
obstacles between the two) to the heads and well away from metal objects which may
screen the electromagnetic waves.
NOTE
If further communication problems are encountered after the Hard Lock device has been
positioned correctly, fix the radio to a wall of the workshop, taking care to position it:
• high up,
• well way from metal objects,
• "visible" to the heads.
Relative humidity: 20%
Temperature range: 5°C
The machine must not be operated in potentially explosive atmosphere.
The manufacturer presets the aligner to operate with a power supply of 230 VAC.
It can be preset to operate on 115 VAC by setting the PC voltage change switch as appropriate.
NOTES
- However, it is important to check that the monitor and printer are preset to operate with
voltages other than 230 VAC.
- The power supply cable supplied with the machine complies with the relevant regulations.
All electrical hook-up operations to the main power supply must be exclusively carried
out by qualified electricians.
• The electrical supply line must be suitably sized in relation to:
1. the machine's power draw, as specified on the machine data plate.
2. the distance between the machine and the electric hook-up point, in order that the voltage
drop at full charge does not exceed 4% (10% during the starting phase) in relation to the
nominal value of the voltage on the machine data plate.
• The user must:
1. provide a power cord in appliance with local electrical regulations

Ambient conditions in the place of operation

90% (without condensation)
÷
35°C
÷

ELECTRICAL HOOK-UP

ATTENTION
WARNING
WARNING
10