SICE A 926 Manual De Instrucciones página 80

Carries out a data restore (carries out a data reset, replacing the data available in
the file with those saved previously).
Stores the set configuration.
Perform standard programming (with default settings) of the radio modules
operating at 2.4 GHz
Switches between display of the caster, total toe and setback adjustment boxes.
(only available in the front axle adjustment window).
Switches between display of the camber, track difference and setback
adjustment boxes. (only available in the rear axle adjustment window).
Accesses and performs the procedure for update of the enabled programs, using
the smart card (in the service procedure)
Runs the front spoiler procedure (the key only appears when the front transverse
goniometers do not give a reading)
Accesses the measuring head zero-calibration procedure
Deletes the selected datum (a Make, Vehicle, Customer or Job)
Loads the data of the last job saved into the memory
No job available for loading into the memory
Increases the rim diameter measurement
Scrolls up to the next item in a list (only available in windows with a list of
options)
Displays the Make - Vehicle - Customer modification window
Transmits data between the PC and the (optional) chassis height and angle
measurement instrument
Displays the vehicle record window.
Runs the rear spoiler procedure (the key only appears when the rear transverse
goniometers do not give a reading)
Displays the vehicle adjustment window, showing the adjustments of the various
angles for the selected vehicle.
Starts the measuring head zero and full scale calibration procedure.
22