SICE A 926 Manual De Instrucciones página 71

• Intelligent unit for simultaneous charging of the four measuring head batteries.
• Measuring heads powered by rechargeable commercial Ni-MH batteries.
• Measuring heads equipped with keypad for selecting the functions directly from the work
position.
• Electronic level on each measuring head.
• Help facility available from any point of the program by pressing the dedicated key.
• Option settings (e.g.: mm / inches, °60,/°100, ...) easily configured within each program
context using menus invoked by pressing a dedicated key.
• Primary vehicle databank containing over 20,000 vehicles with the associated reference data
for the angles.
• Personalized vehicle databank, containing the vehicles and data entered by the user using
the "insert", "modify", "delete" functions.
• Vehicles from the primary and personalized databanks displayed in a single list for easier
consultation.
• Handling of reference data for adjustments based on vehicle chassis height (for vehicles
which support this mode).
• Possibility of saving the job sheets of the operations performed on the vehicles ("Customer
databank").
• Two run-out compensation (ROC) programs:
"3-point ROC":

 Two run-out compensation (ROC) programs;
 possibility of simultaneous execution on several wheels (except for the two wheels on
the same side);
 possibility of fully automatic execution without the need to press any keys.
"Push Mode ROC"

 simultaneous compensation on the four wheels by pushing the vehicle for a distance
corresponding to a wheel rotation of approximately 90°;
 automatic and guided execution using the encoder incorporated into each measuring
head;
 applicable to 4WD vehicles.
• The adjustment windows, with different layouts of the graphic and numeric parts.
• Help function with animated graphic display of adjustment operations.
• Simplified calculation and adjustment of the toe curve.
• Other programs:
adjustment of the vehicle with wheels raised (jack & hold);

calculation and complete adjustment of the toe curve (optional);

calculation of databank tolerances and storage of latest generation Mercedes camber and

caster values according to the manufacturer's provided procedure (optional);
electronic acquisition of chassis height values, very useful when adjusting French cars

(optional);
calculation and adjustment of the steering rack box height;

adjustment of the steering wheel position

• Calibration program.
• Utility and diagnostics programs.
• Various types of self-centering clamps are available for the requirements of different wheels.
13