SICE A 926 Manual De Instrucciones página 107

9. In the box "F", it is possible to select whether or not to ask if you wish to perform
automatic filing (Data Saving) pressing the space bar.
10. In the box "G", it is possible to select whether the information (Data Saving) is filed
in compressed format (zip) or as a simple copy of the files, pressing the space bar.
11. After setting your own choices, press "F6"
12. Press F3 to confirm.
13. Press "F2", to exit the "Save Data" settings screen and go back to the "Service"
screen.
14. Press "F2" to go back to the starting screen (logo screen)
Note: in this stage, it is also possible to perform "Data Saving" manually, carrying out
before step 13, the following operations:
a) Press "F5"
b) Press "F3" or "Enter" ↵ to confirm.
Note: Find an example of a screen with all the settings on fig. 52.
B) "Save Data" manual execution
To perform "Save Data" manually, proceed as follows:
1. From the starting screen (Logo screen), press "F8"
2. Select the "Save Data" option with the ↑ or ↓ arrows
3. Press "Enter" ↵ to confirm.
The screen on figure 51 will be displayed.
N.B.: To move through the different objects (boxes) present on the screen, use
the tab key.
4. With the ↑ or ↓ arrows, select, in the box "B", the disc where you wish to save
"Data Saving".
5. With the ↑ or ↓ arrows, select, in the box "C", the folder where you wish to save
"Data Saving".
6. Press "Enter" ↵ to confirm.
The data filing path is displayed in full in the box "A"
N.B.: the instructions contained from point 7 to 9 inclusive refer to the settings related
to the automatic Backup (see the next note )
7. In the box "D", it is possible to select automatic filing (Data Saving) using the space bar.
8. In the box "E", indicate how often you wish to perform "Data Saving" using the
numeric keypad.
9. In the box "F", it is possible to select whether or not to ask if you wish to perform
automatic filing (Data Saving) pressing the space bar.
10. In the box "G", it is possible to select whether the information (Data Saving) is filed
in compressed format (zip) or as a simple copy of the files, pressing the space bar.
11. After setting your own choices, press "F5"
12. Press F3 to confirm.
13. Press "F2", to exit the "Save Data" settings screen and go back to the "Service" screen.
14. Press "F2" to go back to the starting screen (logo screen)
Note: The path selected to perform the manual filing is valid exclusively for this filing,
the last path saved remains in the memory, performing the procedure described in the
"Save Data" procedure setting up" section. If you wish to save these settings
49