Setting Cooking Steps; Cooking Temperature Setting; Core Temperature Setting; T Value Setting - Royal Catering RC-611 E Manual De Usuario

the symbol. In the same way touch the 2 "digits" that indicate the "Minutes" (nr.28 Fig. 2) and set the
desired value.
for the
During the cooking cycle the display alternately shows: for 4 seconds, the value of the time set
active step, and for 4 seconds the value of the total time remaining ("countdown") for the rest of
the other steps. In case "INFINITE time" is set, the display shows alternately: for 4 seconds, the
"InF" value, and for 4 seconds the elapsed time value.
The value of the TIME parameter ("Hours/Minutes") can also be changed with the cooking cycle
active.

2.7.4 Setting cooking STEPS

Each cooking cycle may consist of up to 10 STEPS. The operating parameters and the desired
values can be set for each step (section 2.2).
After setting the parameters and relative values for the first step ("Phase 01"), the following ones
("Phase 02", "Phase 03" ...), can be set by touching the 2 "digits" indicating the number of the
STEPS (nr.29 Fig.2), and touching the
symbol .
The desired operating parameter values must be set for each step.
the display shows alternately: for 4 seconds, the number of the active step, and for
During cooking,
4 seconds the maximum number of steps set.

2.7.5 Cooking TEMPERATURE setting

Touch the 3 "digits" indicating the TEMPERATURE (nr.24 Fig.2) and set the desired value by touching the
symbols and . Confirm the set value by touching the 3 "digits" of the parameter or touching the
symbol.
for the
During the cooking cycle the display alternately shows: for 4 seconds, the temperature value set
active step, and for 4 seconds the value of the temperature measured inside the cooking chamber.
The value of the TEMPERATURE parameter can also be changed with the cooking cycle active.

2.7.6 CORE TEMPERATURE setting

Touch the symbol (nr.20 Fig.2): the PARAMETER SCREEN appears with the temperature value preset at
50°C. Touch the symbols and to set the different desired value (nr.17 Fig.2). Confirm the set value
symbol.
by tapping on the
During cooking, the display shows alternately: for 4 seconds, the value of the "core temperature" set for
the active step, and for 4 seconds the value of the measured "core" temperature of the food being
cooked.
The value of the CORE TEMPERATURE parameter can also be changed with the cooking cycle
active.
Warning
The parameter value once confirmed excludes the TIME parameter.
CORE TEMPERATURE
2.7.7 T VALUE setting
Touch the symbol (nr.21 Fig.2): the PARAMETER SCREEN appears with the symbol and the preset
temperature value at 50°C. Touching the symbols and set the different desired value (nr.17 Fig.2).
symbol. Below
Confirm the set value by tapping on the is the PARAMETER SCREEN with the
13