Accessories (Optional); Automatic Washing (For Set-Up Ovens) - Royal Catering RC-611 E Manual De Usuario

2.15 Accessories (optional)

The oven is set-up for connection to the following accessories (optional):

AUTOMATIC WASHING

2.15.1 AUTOMATIC WASHING (for set-up ovens)

Touch the symbol (nr.4 Fig. 2): the display shows the PARAMETER SCREEN concerning the "number
of steps" where, instead of the "2 digits", by touching the symbols
seconds) the desired washing program: the corresponding "washing time" is also shown. To confirm it
(within 5 seconds) touch the
symbol. On the display the "wash time" parameter (hours/minutes) is activated in
"countdown" mode.
The following washing programs can be selected:
 L1 Eco Wash (44 minutes)
 L4 Rinse (11 minutes)
When the washing program ends regularly, a 10-second acoustic warning ("beep") is emitted and the
PARAMETER SCREEN flashes on the display,
in green
.
If a washing program ("L1"/ "L2"/ "L3") is voluntarily interrupted by touching the
"Rinse" program ("L4") is automatically activated and cannot be interrupted, but ends regularly. The same
thing happens in the event of a "blackout" during the washing cycle, when power is restored to the oven,
it automatically performs the rinsing cycle.
The "Pump Loading" ("CP") program once activated cannot be interrupted and ends regularly.
The "Rinse" ("L4") program can be interrupted at any time by tapping on

When the temperature in the cooking chamber is above 90°C, washing cannot be activated and the "E
10" alarm appears on the display in orange.
indicates the "Stand-by" mode (paragraph 2.4). To reactivate the oven, touch the
Important
The first time you use automatic washing and every time you change the detergent tank, it is advisable to
use the "CP" program. This way the air inside the peristaltic pump and the connection pipes is removed,
ensuring the correct functionality of the system.
If the "CP" program is repeated 2 times in a row, a "Short rinse" program is automatically activated to
remove any remaining traces of detergent.
When cleaning is completed leave the oven door slightly open.
Warnings
Do not open the oven door during washing operations, as chemical substances used for cleaning and hot
Danger of corrosion and burns!
fumes might escape.
Before starting a cooking cycle ensure there are no detergent residues in the chamber that has just been
washed. Any residues must be removed with a moist cloth suitably protecting your hands, eyes and mouth,
and the cooking chamber must be thoroughly rinsed.
19
symbol (the symbol becomes
 L2 Normal Wash (1h18 minutes)
 CP Pump Loading (2 minutes)
showing the parameters of the finished washing program
To reset the alarm touch the

PROOFER/HOLDING CABINET
and
and then to activate it
),
 L3 Intensive Wash (1h 52 minutes)
the
you can select (within 5
touch the
symbol, the
symbol.
symbol: the display
symbol.