Humidity/Steam Setting; Fan Speed Setting; Semi-Static Cooking Setting; Delayed Start Setting - Royal Catering RC-611 E Manual De Usuario

2.7.8 HUMIDITY/STEAM setting

Touch "oFF"/"digits" (nr.22 Fig.2) and set the desired value by touching the symbols and .
Confirm the set value by adjusting the "digits" of the parameter or touching the symbol.
The value of the HUMIDITY/STEAM parameter can also be changed with the cooking cycle active.

2.7.9 FAN SPEED setting

Touch the digit "3" (nr.18 Fig.2) and set the desired value by touching the symbols and . Confirm
the set value by touching the "digit" of the parameter or by touching the symbol
Setting the value "0" activates the "STOP MOTORS" function: the motors (fans) are blocked, the heating
elements and the humidity/steam regulation are disabled. For this reason the function, suitably inserted
within a program, may be used as a pause during the cycle itself (leavening the food inside the cooking
chamber).
The value of the FAN SPEED parameter can also be changed with the cooking cycle active.

2.7.10 SEMI-STATIC cooking setting

Touch the symbol (nr.19 Fig.2): the active function is shown on the display by the symbol that
systematically disappears and reappears every two seconds; while the value of the relative set speed
remains "fixed" and can also be modified during the cooking cycle.
The SEMI -STATIC cooking parameter can also be disabled with the cooking cycle active.
"Semi-static" cooking is a mode that allows the motors (fans) to be activated only when the heating
elements are operating.
The fans are activated for a few seconds, in order to evenly distribute the heat generated by the heating
elements inside the cooking chamber. This reproduces a type of operation similar to that of a static oven.

2.7.11 DELAYED START setting

Touch the 2 "digits" that indicate the "Hours" (nr.13 Fig. 2), and set the desired value by tapping on the
symbols and . Confirm the set value by touching the symbol: the 2 "digits" of the "Minutes"
appear. Their value can be set and confirmed in the same way as the "Hours".
the display automatically returns to the OVERVIEW
To confirm the function, touch the symbol:
SCREEN (showing all the values of the cooking cycle parameters) with the set parameter value
("pause time")
.
symbol for a few seconds to cancel the function (the cooking TIME is also cancelled if
Touch the
set); otherwise,
touching the symbol activates the DELAYED START and the display only shows the
countdown" of the time before the start of the cooking cycle. The "countdown" can be
"
interrupted by touching the
symbol: the display automatically returns to the OVERVIEW SCREEN
showing all the values of the cooking cycle parameters)
( with the parameter value ("pause time")
reset to zero.
The DELAYED START can be set for a maximum time of 23 hours 59 minutes.

2.7.12 HOLDING setting

The HOLDING function can be activated and disabled by touching the symbol (nr.2 Fig.2). When the
function is activated (the symbol becomes ) in a multi-step cooking cycle, it becomes operational in the
last step, and consists in maintaining a constant temperature inside the cooking chamber.
The value of this temperature can be set by touching the symbols and ,.between 65°C and 100°C
(in 1°C steps). During the HOLDING function you can also set a humidification value (from oFF to 50%).
15