Publicidad
FUEL
A
B
1
FUEL TANK AND FUEL PUMP MODULE
A
B
Rollover valve inspection
1. Check:
• Rollover valve
Faulty → Replace.
Checking steps:
• Connect a hose to the end of rollover
valve "A" and blow into it.
Air should come out from end "B".
• Connect the hose to the end of rollover
valve "B" and blow into it.
Air should not come out from end "A".
Fuel sender inspection
Refer to "FUEL CONTROL SYSTEM" in
Chapter 7.
Fuel tank inspection
1. Inspect:
• Fuel tank
Cracks/damage → Replace.
Fuel hose inspection
Refer to "FUEL INJECTION SYSTEM".
Fuel pump filter inspection
1. Inspect:
• Fuel pump filter 1
Clog/contaminants → Wash the fuel
pump filter in kerosene or gasoline.
4-6
E
Publicidad
Capítulos
