Main Menu ¢Control; Menu Control - Multiplex ROYALpro 7 Manual De Instrucciones

pro
ROYAL
Main menu ¢Control
15.
The main menu Control is opened by pressing this
button:
The term transmitter control refers to all those operating
elements on the transmitter which are assigned to a
control function. These include sticks, sliders and
switches.
This menu is dynamic, i.e.:
The menu content differs for fixed-wing model air-
craft and helicopters.
The screen only displays those transmitter controls
which are used directly to control servos or mixers.
Controls which have no variable parameters are
not displayed
( Tow rel. , Brake , Mixture , AUX1 and AUX2 ).
For a simple fixed-wing model aircraft or helicopter the
main menu Control may look like this:
Typical fixed-wing model aircraft:
¢Control
¨Exit
Aileron
Elevator
Rudder
Throttle
Spoiler
ªFlap
TriggerPoint ....
Typical model helicopter:
¢Control
¨Exit
Aileron
Elevator
Rudder
Collect.
Throttle
TriggerPoint ....
66
H
....
....
....
....
....
....
....
....
....
....
....

Menu Control

15.1.
Control Parameter
Aileron Trim
Elevator
Step
Rudder
D/R
Trvl
Expo
Throttle TrCut
Trim
Step
Mode
Expo
Slow
Spoiler
Time
Flap
Fixed value
L. gear Time
Tow rel.
No adjustment at the transmitter control end!
Brake
Adjustment is only possible in the menu
¤Servo, Calibrate
Gyro
Mixture
Direction of rotation
Centre
AUX1
End-points
AUX2
Curve points
TriggerPoint
( 15.3.)
Default
Current trim (display only)
Trim increment
0.5% 1.5% 2.5% 3.5%
Dual-Rate
10% to 100%
Transmitter control travel setting
Flight phase specific
0% to 100%
Flight phase specific
-100% 0% 100%
Motor CUT switch,
(display only, with Status * =
active)
Current trim
(display only)
Trim increment
0.5% 1.5% 2.5%
Effect of throttle trim
HALF = from idle to half-throttle
FULL = from idle to full-throttle
Expo
-100% 0% 100%
Delay, only when throttle is opened
0.0s 6.0s
to
Slow function
0.0s to 6.0s
Flight phase specific
-100% OFF 100%
Slow function
0.0s to 6.0s
á
P3
P1, P5
P2, P4