Multiplex ROYALpro 7 Manual De Instrucciones página 436

pro
ROYAL
21.2. Model helicopters
HELImech model template
21.2.1.
Suitable for:
Main rotor control system with mechanical mixers.
Typical models:
Ergo, Futura, Moskito, Raptor.
Assigned transmitter controls and switches:
Assignment used: HELI
You will find an overview of the global assignment of
transmitter controls and switches in Chapter (
Assigned servos / receiver outputs:
Servo configuration MPX-UNI
Timer setting: Motor run time
´
Sum timer
controlled by throttle limiter (F).
Fine-tuning:
a. Check stick functions (roll / pitch / yaw).
Select different stick mode if necessary:
L, Assignment , Mode .
b. Check servo directions for all functions.
Reverse servos if necessary (REVERSE):
K, Calibrate , select servo, Parameter REV/TRM .
c. Gyro
( 13.7.).
104
HELIccpm model template
21.2.2.
Suitable for:
Main rotor control system with electronic mixers
CCPM (Cyclic Collective Pitch Mixing)
with three or four servos, 90° to 150°.
Typical models:
Raptor E550, T-Rex 450 – 600, ECO 8, Logo,
Fury, Three Dee NT, Uni-Expert.
Assigned transmitter controls and switches:
Assignment used: HELI
22.1.).
You will find an overview of the global assignment of
transmitter controls and switches in Chapter (
Assigned servos / receiver outputs:
In the model template HELIccpm we assume a 120°
swashplate with pitch-axis servo at the rear:
Servo configuration MPX-UNI
Timer setting: Motor run time
Sum timer
Fine-tuning:
a. Check stick functions (roll / pitch / yaw).
Select a different mode if necessary:
L, Assignment , Mode .
b. Check direction of servo rotation for all functions
Reverse servo direction if necessary (REVERSE):
K, Calibrate , select servo, parameter REV/TRM .
c. Possible gyro facilities
( 13.7.).
´
controlled by throttle limiter (F).
22.1.).