Install This Product - Pioneer VREC-130RS Manual Del Propietário

Install this Product

1 Clean the installation area
2 Install this product.
1 Fix the mounting cradle to the Main Unit
2 Install at the specified position of the front windscreen, adjusting the direction to make the image
horizontal.
CAUTION
• Make sure that the surface of the front windscreen is clean and dry, before attaching the cradle.
• Firmly press the suction cradle installed on the windscreen.
• Do not install the cradle by itself. Always use it connected with the Dash Camera.
• Never touch the surface of the LCD.
• Install firmly so that it does not come off. Incorrect installation may cause this to drop while driving and
cause an accident. Inspect the installation state from time to time.
• To avoid the windscreen mounted cradle from detaching, you may attach the safety strap (included
in the box).
− 13 −