Descargar Imprimir esta página

Démontage Stator; Desmontaje Stator - Husqvarna SM 610 Manual De Oficina

Ocultar thumbs Ver también para SM 610:

Publicidad

SMONTAGGIO MOTORE
ENGINE DISASSEMBLY
DÉCOMPOSITION MOTEUR
MOTORAUSBAU
DESMONTAJE MOTOR
Smontaggio statore
Dal coperchio accensione precedentemente rimosso, togliere le cinque viti a
brugola [(tre da 6 mm (1) e due da 4 mm (2)] e sfilare rispettivamente statore
e pick - up dal coperchio sinistro.
Disassembly of the stator
From the ignition cover removed before remove the five Allen screws [(three 6
mm (1) and two 4 mm(2)], then remove the stator and the pick-up from the L.H.
cover
Démontage stator
Du couvercle de l'allumage précédemment enlevé, enlever les cinq vis à
hexagone entérieur [(trois à 6 mm (1) et deux à 4mm (2)] et déboîter
respectivement le stator et le pick-up du couvercle gauche.
Abmontierung der Stator
Von dem schon weggebracht Anzündungsdeckel, die fünf
Innensechskantschrauben [(drei von 6 mm (1) und zwei von 4 mm(2)] lösen
und aus dem linken Deckel den Stator und den Pick-up ausziehen.

Desmontaje stator

Da la tapa encendido precedentemente movida, sacar los cinco tornillos
hexagonales [(tres de 6 mm (1) y dos de 4 mm (2)] y extraer respectivamente
stator y pick-up desde la tapa izquierda.
Part. N. 8000 A7918 (02-2007)
F.39

Publicidad

loading

Este manual también es adecuado para:

Te 610 i.e.