Yamaha WaveRunner FX140 Manual De Servicio página 426

POWR
c
J J J
1 2
J J J
1 3
2
CRANKSHAFT
J J
3 4 5
J J
J J J
5 3 2 1
4
J J
4 5
• Tighten the bolts to specification in the
tightening sequence cast on the crank-
case.
Refer to
"CRANKCASE".
• Remove the lower crankcase and the
crankshaft journal lower bearings.
• Measure the compressed Plastigauge
width c on each crankshaft journal.
If the crankshaft-journal-to-crankshaft-
journal-bearing clearance is out of speci-
fication, select replacement crankshaft
journal bearings.
4. Select:
• Crankshaft journal bearings (J
NOTE:
• The numbers stamped into the crankshaft
web and the numbers stamped into the lower
crankcase are used to determine the
replacement
sizes.
• "J –J " refer to the bearings shown in the
1 5
crankshaft illustration.
• If "J –J " are the same, use the same size
1 5
for all of the bearings.
For example, if the crankcase "J
shaft web "J " numbers are "5" and "2" respec-
1
tively, then the bearing size for "J
Bearing size of J
"J " (crankcase) – "J
1
5 – 2 = 3 (blue)
BEARING COLOR CODE
1
2
3
4
5
5-103
"Crankcase assembly"—
1
crankshaft journal
" and crank-
1
" is:
1
:
1
" (crankshaft web)
1
brown
black
blue
green
yellow
E
®
–J )
5
bearing