Yamaha WaveRunner FX140 Manual De Servicio página 612

– +
ELEC
INDICATION SYSTEM
Overheat warning indicator
1. Check:
• Overheat warning indicator
Not operating → Replace the multifunc-
tion meter.
Checking steps:
• Disconnect the thermoswitch (engine)
connector 1 (blue) or engine tempera-
ture sensor connector 2 (black) or ther-
moswitch (exhaust) 3 connector.
• Connect the jumper lead to the female
terminal of the disconnected connector.
• Check that the multifunction meter over-
heat warning indicator comes on and the
buzzer sounds.
Engine trouble warning indicator
1. Check:
• Engine trouble warning indicator
Not operating → Replace the multifunc-
tion meter.
Checking steps:
• Remove the coupler of the sensor indi-
cated in the multifunction meter.
• Check if "Irregular" is indicated in the
Diagnosis Record of the Yamaha Diag-
nostic System.
• Start the engine and check that the
engine check warning indicator comes on
and the buzzer sounds.
7-50
E