Yamaha WaveRunner FX140 Manual De Servicio página 860

TRBL
ANLS
1
TROUBLE ANALYSIS
2
Self-diagnosis
With the engine running, press the hour meter/
voltmeter display select switch 1 and the
speedometer display switch 2 for 8 seconds
and check if an error code is indicated on the
multifunction meter.
Code
13 Incorrect pulser coil signal
Incorrect engine temperature
15
sensor signal
Incorrect throttle position sensor
18
signal
19 Incorrect battery voltage
Incorrect intake air temperature
23
sensor signal
Incorrect cam position sensor
24
signal
Incorrect intake air pressure sensor
29
signal
39 Incorrect oil pressure sensor signal
Incorrect slant detection switch
47
signal
48 Incorrect data transmission
If the Yamaha Diagnostic System is not used
to check the symptoms listed in the table, the
error codes can be checked easily with the
self-diagnosis in the multifunction meter. How-
ever, if there are numerous error codes dis-
played, be sure to check them with the
Yamaha Diagnostic System.
9-59
E
Symptom