RADWAG 4Y Serie Manual Del Usuario página 112

•
In order to abort the process press <
Weighing T
•
Upon pressing Weighing T button, the balance searches samples list in order to find the first
sample for which weighing <T> is still to be carried out. If there are no such samples the
balance displays a message informing you that the operation is disabled.
•
If the operation is enabled then new data on initiated process is displayed in the grey
workspace.
•
You are guided through the process by means of prompts visible either in the workspace or
bottom bar.
•
Load the weighing pan with a sample container and press <
•
Upon pressing <
•
Unload the weighing pan and press <
in order to find the next sample for which weighing <T> is still to be carried out. Follow the
above procedure and weigh the remaining containers.
•
In order to abort the process press <
Weighing T+A
•
Upon pressing Weighing T button, the balance searches samples list in order to find the first
sample for which weighing <T> is still to be carried out. If there are no such samples the
balance displays a message informing you that the operation is disabled.
•
If the operation is enabled then new data on initiated process is displayed in the grey
workspace. You are guided through the process by means of prompts visible either in the
workspace or bottom bar.
•
Load the weighing pan with a sample container and press <
•
Container mass value is assigned to a sample as tare value, balance indication is zeroed,
and you are prompted to place the sample in the container. Follow the prompt and press <
> button. For <Ambient condition> parameter set to <Value> option, a window for
entering temperature and humidity values is displayed. For <Ambient condition> parameter
set to <Online> option, a window for confirmation of values taken from ambient conditions
module is displayed.
Caution! If <Ambient conditions> parameter for the differential weighing mode is set to <No> value,
the software skips this part of the process.
•
Press < > button to confirm ambient conditions values, differential weighing home screen
is displayed, you are prompted to unload the weighing pan.
•
Unload the weighing pan and press <
in order to find the first sample for which weighing <A> is still to be carried out. Follow the
above procedure and carry out weighing of the remaining samples.
•
In order to abort the process press <
Measurement of series samples can be carried under the following procedures: weighing A, weighing
T or weighing T+A. Each of the series samples features status informing you on a process stage for a
given sample. Upon entering the series database and selecting a particular series for preview you
are provided with list of samples recorded for the series.
> button.
> button you are prompted to unload the weighing pan.
> button.
> button.
- 112 -
> button. The balance searches samples list again
> button. The balance searches samples list again
> button.
> button.