Products - RADWAG 4Y Serie Manual Del Usuario

•
Exporting database content to a USB flash drive via USB port <
•
Printing data on a specific record in a database <
The above processes are initiated by dedicated buttons located on the top of the display. Follow the
displayed commands.

30.2. Products

<Products> database contains names of all products that are weighed, counted or controlled.
Procedure:
1. Enter < Databases> submenu, press < Products> entry.
2. Press < Add> button to add a new product to the database, or
3. Select already existing product.
List of parameters defined for a product:
1. Name
2. Description
3. Code
4. EAN code
5. Mass
6. Dosing speed
7. Min
8. Max
9. Tolerance
10. Tare
11. Price
12. PGC mode
13. Batch portion
14. SQC: Unit
15. Batch quantity
16. Interval of average tare determination
17. Packages quantity
>.
[Product name]
[Product description]
[Product code]
[Product EAN code]
[Unit mass of a product]
[Option available for <Mass control> mode, determines in
[%] (0% - 100%) feeder dosing speed. The value of dosing
speed is conditioned by size, shape and mass of dispensed
parts (pills), it has to be determined by tests]
[Minimum mass for weighing the product using result control
thresholds – LO. Value of <T1-> error for <Mass control>
mode determined as percent of the nominal mass]
[Maximum mass for weighing the product using result
control thresholds – HI. Value of <T1+> error in working
mode <Mass control> working mode determined as percent
of the nominal mass]
[% value calculated versus mass (5) denoting measuring
area in which the measurement is recognized as correct.]
[Product's tare value, set automatically on selecting a
product from the database]
[Unit price of a product]
[Control mode (Non-destructive
destructive Empty – Full, Destructive Full – Empty,
Destructive Empty – Full)]
[Measuring batch for control: Non-destructive Empty – Full,
Destructive Full – Empty, Destructive Empty – Full]
[Product measuring unit]
[Option available only for <PGC> mode, specifies controlled
product batch quantity]
[Option available only for <PGC> mode, specifies
minimum time interval needed for estimation of a
packaging average tare; given in [h]; if software
detects that pre-set time interval has passed, it
displays a message: <Estimate average tare>. The
message has informative character and you can
decide whether to carry out the process or not.]
[Option available only for <PGC> mode, specifies number of
packagings needed for estimation of average tare]
- 142 -
>.
Average tare, Non-