RADWAG 4Y Serie Manual Del Usuario página 167

•
Adjustment
•
Zero
•
Tare
•
Set tare
•
Disable tare
•
Restore tare
•
Packaging
•
Print
•
Header printout
•
Footer printout
• Universal variable 1 ÷ 5
•
Accept
•
Abort
•
Operator
•
Left door
Upon change of the logic state of the input system, e.g. from [0] to [1], a function that is assigned to
the system is carried out. For instance:
•
automatic balance adjustment,
•
display of set checkweighing threshold values,
•
restoring tare value.
Procedure:
1. Press key, next press: <
2. Enter < Inputs/Outputs> submenu and select <
3. Edit a selected input; list of available functions is displayed.
4. Select a given function and return to weighing.
Outputs are used to SIGNAL weighing state. The logic state of the output system switches, e.g. from
[0] to [1], when condition assigned to the output is met.
Each of the 4 outputs can be assigned with the following functions:
None
Stable
MIN stable.
MIN unstable
OK stable
OK unstable
MAX stable
MAX unstable
Cycle completion confirmation
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Inputs/Outputs> button.
Inputs> parameter.
-------
Each stable measurement switches the logic state.
Stable measurement below [MIN] threshold switches the logic
state.
Unstable measurement below [MIN] threshold switches the
logic state.
Stable measurement within [MIN] [MAX] thresholds switches
the logic state.
Unstable measurement within [MIN] [MAX] thresholds switches
the logic state.
Stable measurement above [MAX] threshold switches the logic
state.
Unstable measurement above [MAX] threshold switches the
logic state.
End of procedure.
- 167 -
Add to statistics
Product
Warehouse
Customer
Parts counting: Set part mass
Parts counting: Determine part mass
Percent weighing: Set reference mass
Percent weighing: set 100%
Solid density
Liquids density
Air density
Automatic Weight Crane Control
Task
Reference weight