Start-Up Logo; Export Of System Events; Scheduled Tasks; Adjustment - RADWAG 4Y Serie Manual Del Usuario

34.16.

Start-Up Logo

The parameter enables you to change logo that is displayed on balance start-up.
34.17.

Export of System Events

The parameter enables you to generate a special type of a file that is automatically saved to a USB
flash drive, plugged to USB port. The file helps RADWAG service to diagnose cause of problems
occurring during balance operation.
Procedure:
1. Plug a USB flash drive to mass comparator's USB port.
2. Enter < Misc.> submenu.
3. Select <Export system events> parameter.
4. The software generates a file and automatically saves it on the USB flash drive.
5. The generated file has to be sent to RADWAG.
35.

SCHEDULED TASKS

This parameter provides settings that allow to plan cyclic performance of particular operations, e.g.
balance adjustment or display of prompts.

35.1. Adjustment

< Scheduled adjustments> parameter allows you to precisely specify time for adjustment
performance and interval between successive adjustments. The parameter is not connected with
automatic adjustment and its criteria (time, temperature). You can schedule internal and external
adjustments. In order to schedule external adjustment, it is necessary to record mass standards
into balance memory first.
Prior to setting the schedule of external adjustments it is necessary to add adjustment weights.
Procedure:
1. Enter operator menu.
2. Select <Adjustment> submenu.
3. Go to < Adjustment weights> parameter and provide respective data.
(option enabled only for authorized operators)
(option enabled only for authorized operators)
- 176 -