RADWAG 4Y Serie Manual Del Usuario página 28

Disassembly steps:
MYA F Balance
Disassembly steps:
XA 4Y.A.PLUS Balance
•
Open and remove chamber lid (1).

Remove the weighing pan (2).
•
Press the buttons marked with arrows to
release the chamber for filters weighing (3) and
remove it.
Caution: Pay special attention while assembling
the chamber. Guide the pins so that they are
evenly inserted into the base openings (inaccurate
inserting of the pins will cause incorrect assembly
and may cause balance damage).
- 28 -
Remove the weighing pan
and the draft shield. Clean
the components when
detached. With this your
balance mechanism is
protected against
accidental damage.
Undo and remove the top
pane protection, next slide
the pane out of a guide bar.