RADWAG 4Y Serie Manual Del Usuario página 146

HH - hour of control end,
mm - minute of control end,
You can preview data on each control.
Procedure:
1. Enter < Databases> submenu, follow procedure described in section 30 of this user manual.
2. Enter <Prepackaged Goods Controls> database and select a desired control record.
List of parameters defined for control:
1. Batch number
2. Result
3. Start date
4. End date
5. Product
6. Operator
7. Average
8. Average limit
9. Standard deviation
10. Batch quantity
11. Measurements quantity
12. Method
For SQC mode controls, the data comprise the following values.
Each report on completed product control is sent to a printer and saved to the <Controls reports>
database. Each control saved to the database features specific number assigned at the moment of
control completion.
Control number format:
y y / M M / d d / H H / m m / s s, where:
yy - year of control end,
MM - month of control end,
dd - day of control end,
HH - hour of control end,
mm - minute of control end,
ss - second of control end.
You can preview data on each control.
Procedure:
1. Enter < Databases> submenu, follow procedure described in section 30 of this user manual.
2. Enter < SQC reports> database and press respective record.
List of parameters defined for control:
1. Batch number
2. Result
3. Start date
4. End date
5. Product
6. Operator
7. Average
8. Average limit
9. Standard deviation
10. Batch quantity
size of tested sample in accordance with the regulation]
11. Measurements quantity
[batch number of controlled product]
[control status (result)]
[control start date]
[control end date]
[name of controlled product]
[name of an operator carrying out control]
[average value from carried out measurements]
[average disqualifying value]
[average standard deviation]
[quantity of a batch; value for which the software accepts the
size of tested sample in accordance with the regulation]
[quantity of carried out measurements]
[control method (regulated by the act or by internal criteria)]
[batch number of controlled product]
[control status (result)]
[control start date]
[control end date]
[name of controlled product]
[name of an operator carrying out control]
[average value from carried out measurements]
[average disqualifying value]
[average standard deviation]
[quantity of a batch; value for which the software accepts the
[quantity of carried out measurements]
- 146 -