Checkweighing For Parts Counting Mode; Dosing In Parts Counting Mode - RADWAG 4Y Serie Manual Del Usuario

•
Enter weight value for a single part (section 16.3), next put parts to be counted on the
weighing pan, parts quantity is displayed.
•
Determine mass of a single part from a given quantity of parts (section 16.4.). ACAI function
pictogram is displayed (providing that the function is active). Next put parts to be counted
on the weighing pan, parts quantity is displayed.
•
Acquire weight value for a single part from the database (section 16.5). To do it, you have to
select respective product. Now put parts to be counted on the weighing pan, parts quantity is
displayed.
Caution! It is necessary to tare any additional elements (packaging) prior to counting process start.

16.8. Checkweighing for Parts Counting Mode

Parts counting process can be aided by checkweighing function, i.e. control whether indication is
within the set thresholds.
Checkweighing requires setting values for two thresholds:
•
Min threshold [Min= ... pcs.]
•
Max threshold [Max= ... pcs.]
and setting YES value for Bar graph. The Bar graph displays relation: CURRENT PARTS
QUANTITY/CHECKWEIGHING THRESHOLDS.
In order to define Min and Max thresholds' values open Products database and edit the Product
record or use <
Procedure:
1. Press grey workspace, next select <Information> parameter.
2. Set Bar graph to YES value, return to parts counting mode.
3. Press grey workspace, next select <Buttons> parameter.
4. Assign <Checkweighing Thresholds> parameter to one of the quick access buttons.
5. Return to parts counting mode.
6. Press < Checkweighing thresholds> button and
Return to parts counting mode.
7. Bar graph is displayed, its colour corresponds to the status of parts counting process.
•
yellow: current parts quantity below the set Min threshold value.
•
green: current parts quantity within the set thresholds.
•
red: current parts quantity above the set Max threshold value.

16.9. Dosing in Parts Counting Mode

Parts counting process can be aided by dosing function, i.e. control whether indication does not
exceed the set target value.
Dosing requires setting a target value, e.g. 100 parts, and a % tolerance. The bar graph displays the
target value as a bracket. In order to define target value press quick access button, <
Value>.
Checkweighing thresholds> quick access button.
enter Min and Max thresholds values.
- 76 -
Target