RADWAG 4Y Serie Manual Del Usuario página 186

UT_OK CR LF - command carried out
UT_I CR LF - command understood but not accessible at this moment
ES CR LF - command not recognised (tare format incorrect)
Caution:
Use dot in tare format as decimal point.
Send stable measurement result in basic measuring unit
Format: S CR LF
Response options:
S_A CR LF - command understood and in progress
S_E CR LF - time limit exceeded while waiting for stable measurement result
S_I CR LF - command understood but not accessible at this moment
MASS FRAME - response: mass value in basic measuring unit
Response format:
1 2-3
stability
S space
marker
Example:
S CR LF - command sent from a computer
S _ A CR LF - command understood and in progress
S _ _ _ _ - _ _ _ _ _ _ 8 . 5 _ g _ _ CR
where: _ - space
Immediately Send Measurement Result in Basic Measuring Unit
Format: SI CR LF
Response options:
SI_I CR LF - command understood but not accessible at this moment
MASS FRAME - command carried out, immediate response: mass value in basic measuring unit
Response format:
1 2 3
S I space
Example:
S I CR LF - command sent from a computer
S I _ ? _ _ _ _ _ _ _ 1 8 . 5 _ k g _ CR LF
where: _ - space
4 5
space character
LF
4 5
stability
space
marker
6 7-15
mass space
- command carried out, response: mass value in
basic measuring unit
6 7-15
character mass space
- command carried out, immediate response: mass
value in basic measuring unit
- 186 -
16 17 18 19
unit
16 17 18 19
unit
20 21
CR LF
20 21
CR LF