RADWAG 4Y Serie Manual Del Usuario página 61

•
surface tilt test,
•
fully automatic balance levelling,
•
correct balance level control,
•
confirmation of balance levelling printed on adjustment reports and weighing reports.
Upon switching the balance on, the levelling takes place automatically. Each time before the internal
adjustment the level is checked, when the balance is not levelled then the internal adjustment takes
place only upon prior levelling.
Procedure of user-performed balance levelling:
1. Press level status pictogram,
screen.
2. Control panel of level function is displayed. Along with the level indicator, balance view is
presented.
3. Press < > button – levelling process runs automatically, during the automatic levelling the
feet engines operation is heard..
4. To abort the levelling process press <
5. When the marker takes central position, its colour turns from red to green <
correctly levelled.
6. Press button or
The remaining balance series are equipped with an Auto Level System which allows monitoring of
the balance level. Level monitoring is performed uninterruptedly in the course of balance operation.
Level status is signalled with a respective pictogram, displayed in the upper right corner of the
operation panel screen. The system monitors balance level state. In case of level deviation, position
of level marker is displayed on the screen and/or respective alarm is activated. Balance level setting
proceeds.
Procedure:
1. Press level status pictogram,
screen.
2. Control panel of level function is displayed. Along with the level indicator, balance view is
presented.
, it is displayed in the upper right corner of the operation panel
> button.
field, the home screen is displayed.
, it is displayed in the upper right corner of the operation panel
- 61 -
> – the balance is