Sqc Control Report - RADWAG 4Y Serie Manual Del Usuario

Control status
There are different control status options differentiated by colour. Particular colour informs you
whether the permissible error quantities are out of range or not. Error values and permissible error
quantities are specified for a particular product.
Upon process completion a report is generated and recorded in database.
Caution! For a template and an example of a report on a control process read section 26.4 of this user
manual.

26.4. SQC Control Report

An example of SQC report:
---------------------------- SQC --------------------------
Balance type
Range
Reading unit
Balance S/N
Start date
End date
Operator
Product
Batch number
Nominal mass
Tare
[T1-] error value
[T2-] error value
[T1+] error value
[T2+] error value
Batch quantity
Measurements quantity
[T1-] errors quantity
[T2-] errors quantity
[T1+] errors quantity
[T2+] errors quantity
Min
Max
Average
Sum
Standard deviation
Method
Indication
Measurements
1. 50.0525 g
2. 50.0525 g
3. 50.0525 g
4. 50.0525 g
---------------------------------------------------------------
Signature
...........................................................................
- no more T1- error can occur (yellow)
- T2- error has occurred, control result is negative (red)
AS 3Y
220 g
0.0001 g
442566
2012.10.19 12:27:09
2012.10.19 12:37:20
Kowalski
TEST 01
50 g
0 g
1 g
3 g
1.5 g
4 g
100
30
0
0
0
0
50.0525 g
50.3638 g
50.291163 g
1508.7349 g
0.133916 g
SQC
Positive
- 120 -