Pre-Packaged Goods Control; Pgc Mode Start-Up - RADWAG 4Y Serie Manual Del Usuario

28.

PRE-PACKAGED GOODS CONTROL

< Prepacked Goods Controls> is a working mode enabling performance of pre-packaged goods
controls (single stand control or multi-stand control), supported by a database containing products
and operators. A control initiated using balance is automatically finished after a pre-set packages
quantity (samples) has been controlled.
Balances may connect to E2R SYSTEM software and form a multi-stand system (network). Each
weighing instrument is an independent weighing workstation and information on the control is sent to
the computer software. Computer software enables collecting real-time data from each of the
connected weighing instruments. The system allows you to start control process using the instrument
or computer software.
Collected data allow you to assess quality of produced pre-packaged goods and their conformity
with:
•
the Regulation by the Central Office of Measures of 3 April 1997, on the requirements
concerning quantity inspection of pre-packaged goods control, which inspection is to be
carried out by means of random selection of the measurements results and sending those
results to pre-packaged goods control procedure (FOR EUROPEAN UNION).
•
a company quality control system (internal control).
Control process:
•
operator selection,
•
product selection,
•
control start,
•
acquiring weighing records,
•
control finish (carried out automatically when predefined number of packages is weighed),
•
control report print.
Caution! For detailed information on establishing a connection with <
'COMPUTER'.

28.1. PGC Mode Start-Up

Procedure:
1. Go to the home screen, press
opened.
2. Select < PGC> mode, Prepacked Goods Controls home screen is displayed.
3. <Start control> message is visible in the bottom bar along with
control.
(function disabled for standard balance models)
pictogram located in the top bar. <Working modes> submenu is
- 122 -
E2R System> read section
button, press it to start the