Packaging; Unpacking And Installation; Workstation; Unpacking - RADWAG 4Y Serie Manual Del Usuario

2.2. Packaging

Keep all package elements should your device be transported in the future. Remember that only
original packaging can be used for shipping purposes. Prior packing, uncouple any cables, remove
any separable components (weighing pan, shields, inserts). The balance components must be
packed into an original packaging, this is to protect them against potential damage during
transportation.
3.

UNPACKING AND INSTALLATION

3.1. Workstation

•
Operate the device in a workroom free of vibrations and shakes, where there are no air drafts
nor dust.
•
Permissible ambient temperature range: + 10 °C ÷ + 40 °C.
•
Make sure that the relative humidity is not higher than 80%.
•
Make sure that in the course of balance operation the room temperature changes slowly and
gradually.
•
Place the balance either on a robust-design table or on a wall bracket which is both distant
from heat sources and insusceptible to vibrations.
•
Take special precaution while weighing magnetic objects, part of the balance is a strong
magnet. Should magnetic loads be weighed, use under-pan weighing option in order to
remove the weighed load from an area influenced by the magnet. The hook for under-pan
weighing is installed in the balance base. Shall static electricity affect balance indications, it is
necessary to ground the base, grounding bolt is placed at the back.
•
Ultra-microbalances and other devices installed on-site by RADWAG employees cannot be
moved to another location. Only authorized RADWAG employee can move the device to
another location.

3.2. Unpacking

Cut the adhesive tape. Take the device out of the packaging. Open the accessory box, take the
balance components out of it.

3.3. Standard Delivery Components List

•
Balance
•
Bottom weighing chamber shield (XA)
•
Centring ring (XA)
•
Weighing chamber shield/lid (UYA, MYA)
•
Weighing pan
•
Weighing pan shield
•
Bottom ring (MYA, model B and C)
•
Power supply
•
User manual - CD version
- 19 -