RADWAG 4Y Serie Manual Del Usuario página 129

Product
Load full
•
Control status
- positive
- negative (control of sample 2 permitted)
- negative
For status respective field turns to yellow:
For status respective field turns to red:
•
Workspace
To enable display of the measurements results in a form of graph press
- Name of the controlled product.
- Nominal value of the controlled product.
- Average mass of the controlled product.
- Disqualifying average value.
- Characteristics
-9g -
T Max - permissible
n - actual quantity of T negative errors.
- Characteristics of sample's 2T negative errors:
-18g -
2T Max -
n - actual quantity of 2T negative errors.
- Net weight of the controlled product.
- Packaging tare.
- Control status: positive, negative.
Prompt regarding process course.
- Command specifying number of all measurements to be done for a
given batch.
- Display of numeric data/graph.
- Information on control / results of performed control.
- Abort control process.
yellow warns that occurrence of another T error will end with negative
result of control.
red means that average mass of controlled product is lower than
disqualifying average value
- 129 -
of sample's
value of
quantity
value of
permissible quantity
T negative
T negative
of T negative
2T negative
of 2T negative
button:
errors:
error,
error,
error,
errors,