Non-Destructive Empty-Full Control Mode - RADWAG 4Y Serie Manual Del Usuario

Press button to confirm. The text and max permissible errors quantity get updated. Upon
completed control of sample 2, the software generates control summary. Report on performed control
may be printed on a balance-connected printer.
Caution!
The template and examples of the average tare determination and PGC reports are to be found further
down this user manual.

28.9. Non-Destructive Empty-Full Control Mode

When you use Non-destructive empty-full mode, set lot (batch portion) value, to do it enter product
data. A message asking you to weigh empty packages first, full next, in the same order is displayed.
Where:
Product
Code
- Name of the controlled product.
- Code of the controlled product.
- Nominal value of the controlled product.
- Average mass of the controlled product.
- Disqualifying average value.
- Characteristics of sample's T negative errors:
- Characteristics of sample's 2T negative errors:
- Net weight of the controlled product.
- 132 -