RADWAG 4Y Serie Manual Del Usuario página 191

n →
1 – Weighing
2 – Parts Counting
3 – Percent Weighing
4 – Dosing
5 – Formulations
6 – Animal Weighing
8 – Solids Density
9 – Liquids Density
10 – Peak Hold
12 – Checkweighing
13 – Statistics
Caution:
Working modes numbering is identical for each kind of balance or scale. The numbers are assigned
to working modes names.
Some balances give only the number as a response.
Example 1:
Command: OMI <CR><LF>
Response: OMI <CR><LF>
2_" Parts counting" <CR><LF>
4_" Dosing" <CR><LF>
12_" Checkweighing" <CR><LF>
OK <CR><LF>
Example 2:
Command: OMI <CR><LF>
Response: OMI <CR><LF>
2 <CR><LF>
4 <CR><LF>
12 <CR><LF>
OK <CR><LF>
Set Working Mode
Command overview:
Command sets particular working mode.
Format: OMS_n <CR><LF>
Response options:
OMS_OK <CR><LF>
OMS_E <CR><LF>
OMS_I <CR><LF>
n - parameter, decimal value determining working mode number. To see detailed description go to
OMI command.
Example:
Command: OMS_13<CR><LF>
Response: OMS_OK<CR><LF>
Give Current Working Mode
Command overview:
Command returns current working mode for a given balance.
Format: OMG <CR><LF>
Response options:
OMG_n_OK <CR><LF>
- give available working modes
- response: accessible working modes
- command carried out
- command carried out
- error in-course of command execution, no parameter or
incorrect format
- command understood but not accessible at this moment
- set Statistics mode
- Statistics mode set
- command carried out, response: current working mode
- 191 -
- give available working modes
- response: accessible working modes
mode number + name
- command carried out