Rs232 Ports Settings; Ethernet Port Settings; Wi-Fi Settings - RADWAG 4Y Serie Manual Del Usuario

The ports are to be configured in <
To enter < Communication> parameter, press
entry.

31.1. RS232 Ports Settings

Procedure:
1. Select communication port <
2. Set respective parameters.
• Baud rate:
• Data bits:
• Stop bits:
• Parity:

31.2. ETHERNET Port Settings

Procedure:
1. Select communication port <
2. Set respective parameters
• DHCP:
• IP Address:
• Subnet mask:
• Default gate:
Caution! The above presented values serve informative purposes only. Set the transmission parameters
in accordance with your local network.
3. Press button, the message <Restart balance to implement changes> is displayed.
4. Return to weighing procedure and restart the weighing device.

31.3. Wi-Fi Settings

Balance equipped with Wi-Fi module displays respective pictogram:
Procedure:
1. Select < Wi-Fi> communication interface.
2. Set respectiveg parameters:
• DHCP:
• IP Address:
• Subnet mask:
• Default gate:
Caution! The above presented values serve informative purposes only. Set the transmission parameters
in accordance with your local network.
3. Press button, the message <Restart balance to implement changes> is displayed.
4. Return to weighing procedure and restart the weighing device.
You may use <Available networks> parameter to view the list of networks detected by the module:
Communication> parameter.
COM1> or <
4800, 9600, 19200, 38400, 57600, 115200 bit/s
5, 6, 7, 8
None, 1, 1.5, 2
None, Odd, Even, Marker, Space
Ethernet>.
Yes – No
192.168.0.2
255.255.255.0
192.168.0.1
Yes – No
10.10.9.155
255.255.255.0
10.10.8.244
- 159 -
key, next select <
COM2>.
Communication>