RADWAG 4Y Serie Manual Del Usuario página 192

OMG_I <CR><LF>
n - parameter, decimal value determining working mode number. To see detailed description go to
OMI command.
Example:
Command: OMG<CR><LF>
Response: OMG_13_OK<CR><LF>
Give Accessible Units
Command overview:
Command returns units available for a particular balance and for a current working mode.
Format: UI <CR><LF>
Response options:
UI_"x ,x , ... x "_OK<CR><LF>
1 2 n
UI_I <CR><LF>
x - unit symbols, separated by means of commas.
x → g, mg, ct, lb, oz, ozt, dwt, tlh, tls, tlt, tlc, mom, gr, ti, N, baht, tola, u1, u2
Example:
Command: UI <CR><LF>
Response: UI_"g, mg, ct"_OK<CR><LF>
Set Current Unit
Command overview:
Command sets current unit for a particular device.
Format: US_x <CR><LF>
Response options:
US_ x_OK <CR><LF>
US_E <CR><LF>
US_I <CR><LF>
x - parameter, units symbols: g, mg, ct, lb, oz, ozt, dwt, tlh, tls, tlt, tlc, mom, gr, ti, N, baht, tola, msg,
u1, u2, next.
Caution:
If x=next, the command swaps to adjacent unit available on the list (it simulates either 'unit'
button pressing or pressing of unit field displayed in mass window).
Example:
Command: US_mg<CR><LF>
Response: US_mg_OK<CR><LF>
Give Current Unit
Command overview:
Command returns current unit.
Format: UG <CR><LF>
Response options:
UG_x_OK<CR><LF>
UG_I <CR><LF>
x - parameter, units symbols
- command understood but not accessible at this moment
- command carried out, response: accessible units
- command understood but not accessible at this moment
- command carried out, response: currently set unit
- error in-course of command execution, no parameter or incorrect
format
- command understood but not accessible at this moment
- set „mg" unit
- „mg" set as a current unit
- command carried out, response: currently set unit
- command understood but not accessible at this moment
- 192 -
- return current working mode
- Statistics mode operated
- return available units
- response: available units