RADWAG 4Y Serie Manual Del Usuario página 174

Report example:
--------------- Autotest Filter: Report --------------
Balance type
Balance S/N
Operator
Software ver.
Date
Time
-------------------------------------------------------------
Reading unit
Internal weight mass
Temperature: Start
Temperature: Stop
-------------------------------------------------------------
Filter
Value release
Repeatability
Stabilization time
.
.
.
Filter
Value release
Repeatability
Stabilization time
Signature
...........................................................................
Procedure:
1. Activate 'Autotest Filter' function, the process starts automatically. Progress bar is displayed.
2. Wait for process completion, a summary is displayed, current filter settings are provided. The
report can be printed.
You can abort the process at any moment. To do that press <X> button.
AUTOTEST GLP
Autotest GLP is a test of repeatability of internal weight loading and determination of
indication error, which error is referred to balance maximum capacity.
Procedure:
1. deposit internal weight twice, next deposit internal weight ten times,
2. adjust the balance,
3. calculate and record the value of standard deviation,
XA 4Y
442566
Hubert
NL1.6.5 S
2015.05.07
09:34:48
0.0001/0.0001 g
148.9390 g
25.26 °C
25.66 °C
Very fast
Fast
0.0042 g
4.505 s
Very slow
Reliable
0.0207 g
5.015 s
- 174 -