Exiting System Stop; Disassembly And Exchange; Exchanging The Bus Coupler - Aventics CANopen Instrucciones De Servicio

AVENTICS | CANopen, CANopen sb | R412009415–BDL–001–AE
1
Fig. 9: Exchanging the bus coupler, example
1 M5x35 hexagon socket head screws, 3 + 0.5 Nm
2 Bus coupler
3 Seal
7.5.1
O
Restart the assembly with "power on".
8
You can exchange the bus coupler, if needed.
The AVENTICS warranty only applies to the delivered
configuration and extensions taken into account in the
configuration. The warranty no longer applies after a
conversion that exceeds these extensions.
8.1
4
2

Exiting system stop

Disassembly and Exchange

Exchanging the bus coupler.

5
3
4
5
Disassembly and Exchange
Tie rod
VS EP end plate
93