Siemens SINAMICS S120 Manual De Listas página 2258

Ackn all faults p2102
(0)
<1>
1st acknowledge p2103[C]
(0)
<2>
2nd acknowledge p2104[C]
<2> (0)
3rd acknowledge p2105[C]
<2> (0)
Pulse generator
Ext fault 3 t_on
0...1000 [ms]
p3110 (0)
p2108[C]
(1)
<2>
p3111[C]
T 0
&
(1)
<2>
p3112[C]
<2> (0)
<1> This parameter refers to the Control Unit and is
used as source to simultaneously acknowledge
all faults on all drive objects.
<2> These parameters refer to the Command Data Sets (CDS) depending on the
individual drive object (DO).
1 2
DO: All objects
Internal control/status words - Control word, faults/alarms
Bit No.
1
p2112[C]
1
<2> (1)
p2116[C]
(1) 1
<2>
p2117[C]
1
(1)
<2>
p2106[C]
(1)
1
<2>
p2107[C]
1
<2> (1)
1
3 4
PROFIdrive bit
Control word, faults/alarms
0 Reserved
1 Reserved
2 Reserved
3 Reserved
4 Reserved
5 Reserved
6 Reserved
7 = Acknowledge fault
8 Reserved
9 Reserved
10 1 = External alarm 1 (A07850)
11 1 = External alarm 2 (A07851)
12 1 = External alarm 3 (A07852)
13 1 = External fault 1 (F07860)
14 1 = External fault 2 (F07861)
15 1 = External fault 3 (F07862)
5
fp_2546_51_eng.vsd
20.08.18 V05.02.03
STW faults/alarms
r2138
r2138.7 To fault buffer [8060.1]
r2138.10 To alarm buffer [8065.1]
r2138.11 To alarm buffer [8065.1]
r2138.12 To alarm buffer [8065.1]
r2138.13 To fault buffer [8060.1]
r2138.14 To fault buffer [8060.1]
r2138.15 To fault buffer [8060.1]
6 7
Function diagram
SINAMICS
4000.00 µs
8
- 2546 -