Publicidad
Idiomas disponibles
Idiomas disponibles
2. TRANSPORT, STORAGE AND HANDLING
Conditions for transporting the machine
The tyre changer must be transported in its original packing and maintained in the position
shown on the outer packing.
- Packing dimensions:
• width .....................................................................................................................................1150 mm
• depth ....................................................................................................................................1950 mm
• height ...................................................................................................................................2100 mm
- Weight of wooden packing:
• STD version .............................................................................................................................kg 600
Ambient conditions for machine transport and storage
Temperature: range from -25° ÷ +55°C.
Do not stack other goods on top of the packing or damage may result.
Handling
To move the packing, insert the tines of a fork-lift
truck into the slots on the base of the packing itself
(pallet) (Fig.3).
Before moving the machine, refer to the HOISTING/
HANDLING section.
Keep the original packing in good conditions to be used if the equipment has to be
shipped in the future.
2.1. UNPACKING
Remove the upper part of the packing and make sure the machine has not been damaged
during transportation.
130
CAUTION!
CAUTION!
3
User manual S 1000
Publicidad
