SICE S 1000 Manual De Instrucciones página 155

7- Ensure that the bead situ-
ated at 180° relative to the tool
is in the well, otherwise use the
bead pressing tool to facilitate
positioning (Fig. 26e).
8- Turn the
(see Fig. 26f).
9- Keeping the
lector turned, press the
the turntable and demount the upper part of the
tyre from the rim (Fig. 26g).
If necessary, operate the
raise the head and complete top bead removal.
10 - Release the
pedal.
11- Move the
the lower bead breaker disc to the rest position.
12- Manually release the hook from the bead.
13- Move the tool holder head away from the work
area by operating controls
14- Operate the
bead breaker disc upwards (Fig. 26h) to about 10 mm above the upper rim edge.
N.B.: Make this operation easier by manually lifting the tyre to 6 o'clock.
User manual S 1000
selector
se-
pedal to turn
control to slightly
selector and the
lever downwards to bring
and
lever to move the bottom
.
26e
26f
UK
26g
26h
155