SICE S 1000 Manual De Instrucciones página 169

- If the system cannot read the USB key, the mes-
sage in Fig. 40o is displayed.
Press the confi rm key
previous screen, then repeat the steps from point
1.
3. Once installation is complete, the message in
Fig. 40p is displayed.
4. Remove the USB key.
5. Use the TPMS VERSION function described
previously to check the FW version now installed
on the S 1000 (see Fig. 40q).
Upon initial installation of the machine and whenever the TPMS board is replaced, the
board must be registered and activated at the website www.sice.it/infoauto.
Registration entitles the user to free software updates for 12 months. After this period,
a subscription is necessary to update the FW and database.
TMPS REGISTRATION FOR FIRST-TIME INSTALLATION
Connect by PC to www.sice.it/infoauto.
Select DEVICES (Fig. 40r - point a) and then TPMS (Fig. 40r - point b).
User manual S 1000
to go back to the
CAUTION!
40o
40p
40q
UK
169