SICE S 1000 Manual De Instrucciones página 132

- Fasten the front motor protection using the provided screws and washers (Fig. 5d and 5e)
- Fit the wheel lifter p.l. (Fig. 5f) using the screws and washers.
- Connect the machine to the power supply and the compressed air supply.
- Remove the lifting hook from the tyre changer (Fig. 5g)
3.2. INSTALLATION AREA
The machine must be installed in accordance with all applicable safety regulations,
including but not limited to those issued by OSHA.
Risk of Explosion or Fire. Never use the machine in an area where it will be exposed to
fl ammable vapours (gasoline, paint thinners solvents, etc.). Never install the machine in
a recessed area or below fl oor level.
IMPORTANT: for the correct and safe operation of the machine, the lighting level in the
place of use should be at least 300 lux.
132
5d
5f
5e
5g
User manual S 1000