SICE S 1000 Manual De Instrucciones página 157

4- Move the
pressure on the tyre (Fig. 27c).
5- Keep the section of the tyre with the lower bead
not yet inserted in the rim partially depressed and
turn the turntable until the fi rst bead is
completely inserted.
6- Position the bead presser to the side of the
mounting tool.
N.B.: If necessary, also use the bead pressing
tool clamps.
7- Operate the
pressing tool until the upper bead is in the well
(see Fig. 27d).
8- Press the pedal to start the rotation until
the second bead is mounted (Fig. 27e - Fig. 27f).
CAUTION!
Avoid personal injury. Make sure the top bead is
correctly inserted in the rim well, throughout the
mounting stage.
User manual S 1000
lever downwards to apply
control to lower the bead
27f
27b
27c
27d
UK
27e
157