SICE S 1000 Manual De Instrucciones página 194

ERRORS
E132 Communication error with p3k
E161 Upper bead breaker position not rea-
ched
E162 Lower bead breaker position not rea-
ched
E163 Incomplete tool rotation or sensors not
detected
E164 Wheel diameter not reached
E166 Tool work position not reached
9. ENVIRONMENTAL INFORMATION
Following disposal procedure shall be exclusively applied to the machines having the
crossed-out bin symbol on their data plate.
This product may contain substances that can be hazardous to the environment and to hu-
man health if it is not disposed of properly.
The following information is therefore provided to prevent the release of these substances
and to improve the use of natural resources.
Electrical and electronic equipment should never be disposed of in the usual
municipal waste but must be separately collected for their proper treatment.
The crossed-out bin symbol, placed on the product and on this page, reminds
the user that the product must be disposed of properly at the end of its life.
In this way it is possible to prevent that a non specifi c treatment of the
substances contained in these products, or their improper use, or improper
use of their parts may be hazardous to the environment or to human health.
Furthermore, this helps to recover, recycle and reuse many of the materials
contained in these products.
Electrical and electronic manufacturers and distributors set up proper collection and treat-
ment systems for these products for this purpose.
At the end of the product's working life, contact your supplier for information about disposal
procedures. When you purchase this product, your supplier will also inform you that you may
return another worn-out appliance to him free of charge, provided it is of the same type and
has provided the same functions as the product just purchased.
Any disposal of the product performed in a different way from that described above will be
liable to the penalties provided for by the national regulations in force in the country where
the product is disposed of.
Further measures for environmental protection are recommended: recycling of the internal
and external packaging of the product and proper disposal of used batteries (only if con-
tained in the product).
Your help is crucial in reducing the amount of natural resources used for manufacturing
electrical and electronic equipment, minimise the use of landfi lls for product disposal and
improve the quality of life, preventing potentially hazardous substances from being released
in the environment.
194
SOLUTION
contact technical support if error persists
Pass to manual mode
Pass to manual mode
contact technical support if error persists
Set position again
Contact support service
User manual S 1000