SICE S 1000 Manual De Instrucciones página 152

Completely release the air from inside the tyre before continuing. Never carry out bead
breaking before having completely release the air from the tyre. Failure to release the
air could cause injury to the operator or damage to the equipment, the tyre or the wheel.
The top bead breaker automatically hooks dur-
ing the descent phase.
1 - Operate the
taking it to about 5 mm above the rim edge (Fig. 25a).
2 - Press the
etration of the lower bead breaker disc (Fig. 25b).
3 - Lubricate the bead to make bead breaking
easier (Fig. 25c).
4 - Press the
5 - Operate the control,
raise the bead breaker disc and fully remove the
bead from its seat on the rim.
6- Turn at least one rotation to fi nish lower bead
breaking.
7 - Move the
cally stop penetration and to withdraw the disc from
the work area.
8 - Use the control to move the upper bead
breaker disc to the work position.
152
CAUTION!
CAUTION!
lever and move the disc,
button to activate pen-
pedal to turn the turntable.
tapping on it, to
lever downward to automati-
25a
25b
25c
User manual S 1000